博客
关于我
强烈建议你试试无所不能的chatGPT,快点击我
UVa401 回文词
阅读量:5162 次
发布时间:2019-06-13

本文共 5281 字,大约阅读时间需要 17 分钟。

Palindromes

A regular palindrome is a string of numbers or letters that is the same forward as backward. For example, the string "ABCDEDCBA" is a palindrome because it is the same when the string is read from left to right as when the string is read from right to left.

 

A mirrored string is a string for which when each of the elements of the string is changed to its reverse (if it has a reverse) and the string is read backwards the result is the same as the original string. For example, the string "3AIAE" is a mirrored string because "A" and "I" are their own reverses, and "3" and "E"are each others' reverses.

 

A mirrored palindrome is a string that meets the criteria of a regular palindrome and the criteria of a mirrored string. The string "ATOYOTA" is a mirrored palindrome because if the string is read backwards, the string is the same as the original and because if each of the characters is replaced by its reverse and the result is read backwards, the result is the same as the original string. Of course, "A""T""O", and "Y"are all their own reverses.

 

A list of all valid characters and their reverses is as follows.

 

 

Character Reverse Character Reverse Character Reverse
A A M M Y Y
B   N   Z 5
C   O O 1 1
D   P   2 S
E 3 Q   3 E
F   R   4  
G   S 2 5 Z
H H T T 6  
I I U U 7  
J L V V 8 8
K   W W 9  
L J X X    

 

 

Note that O (zero) and 0 (the letter) are considered the same character and therefore ONLY the letter "0" is a valid character.

 

Input 

Input consists of strings (one per line) each of which will consist of one to twenty valid characters. There will be no invalid characters in any of the strings. Your program should read to the end of file.

 

Output 

For each input string, you should print the string starting in column 1 immediately followed by exactly one of the following strings.

 

 

STRING CRITERIA
" -- is not a palindrome." if the string is not a palindrome and is not a mirrored string
" -- is a regular palindrome." if the string is a palindrome and is not a mirrored string
" -- is a mirrored string." if the string is not a palindrome and is a mirrored string
" -- is a mirrored palindrome." if the string is a palindrome and is a mirrored string

Note that the output line is to include the -'s and spacing exactly as shown in the table above and demonstrated in the Sample Output below.

In addition, after each output line, you must print an empty line.

 

输入样例:

 

NOTAPALINDROME ISAPALINILAPASI 2A3MEAS ATOYOTA

 

输出样例:

NOTAPALINDROME -- is not a palindrome. ISAPALINILAPASI -- is a regular palindrome. 2A3MEAS -- is a mirrored string. ATOYOTA -- is a mirrored palindrome.
大意就是判断一个输入的字符串是否为回文和镜像的,因此我写了两个函数。而对于题中表格的处理,本来开始打算用数组的,后来觉得不方便,改用switch语句了。
题目本来不难,注意特殊情况的处理,就是当字符串长度为1的时候。当n==1时,是回文的,当且仅当改字符和本身是镜像的时候,这个字符串是镜像的。
对了,还有很重要的一点就是每次输出后都要再输出一个空行,对于我们这种英语渣渣是怎么会注意到这种东西的。。
1 #include 
2 #include
3 using namespace std; 4 5 const char* res[4] = {
" -- is not a palindrome.", " -- is a regular palindrome.", 6 " -- is a mirrored string.", " -- is a mirrored palindrome."}; 7 8 int main(void) 9 { 10 char Reverse(char c); 11 bool Palindrome(char s[], int n); 12 bool Mirrored(char s[], int n); 13 char s[25]; 14 int len; 15 while(cin >> s) 16 { 17 len = strlen(s); 18 bool flag1 = Palindrome(s, len); 19 bool flag2 = Mirrored(s, len); 20 cout << s; 21 if(!flag1 && !flag2) 22 cout << res[0] << endl << endl; 23 if(flag1 && !flag2) 24 cout << res[1] << endl << endl; 25 if(!flag1 && flag2) 26 cout << res[2] << endl << endl; 27 if(flag1 && flag2) 28 cout << res[3] << endl << endl; 29 } 30 return 0; 31 } 32 char Reverse(char c) 33 { 34 switch (c) 35 { 36 case 'A': 37 case 'H': 38 case 'I': 39 case 'M': 40 case 'O': 41 case 'T': 42 case 'U': 43 case 'V': 44 case 'W': 45 case 'X': 46 case 'Y': 47 case '1': 48 case '8': 49 return c; 50 case 'E': 51 return '3'; 52 case 'J': 53 return 'L'; 54 case 'L': 55 return 'J'; 56 case 'S': 57 return '2'; 58 case 'Z': 59 return '5'; 60 case '2': 61 return 'S'; 62 case '3': 63 return 'E'; 64 case '5': 65 return 'Z'; 66 default: 67 return 0; 68 } 69 } 70 //判断是否是回文字符串 71 bool Palindrome(char s[], int n) 72 { 73 int i; 74 if(n == 1) 75 return true; 76 for(i = 0; i < n / 2; ++i) 77 { 78 if(s[i] != s[n - 1 - i]) 79 return false; 80 } 81 return true; 82 } 83 //判断是否是镜像字符串 84 bool Mirrored(char s[], int n) 85 { 86 int i; 87 if(n == 1) 88 { 89 if(Reverse(s[0]) == s[0]) 90 return true; 91 else 92 return false; 93 } 94 for(i = 0; i < n / 2; ++i) 95 { 96 if(Reverse(s[i]) == 0) 97 return false; 98 if(Reverse(s[i]) != s[n - 1 - i]) 99 return false;100 }101 return true;102 }
代码君

 

转载于:https://www.cnblogs.com/AOQNRMGYXLMV/p/3817643.html

你可能感兴趣的文章
类的加载和反射
查看>>
Linux学习笔记四
查看>>
JavaScript
查看>>
[转]getHibernateTemplate出现的所有find方法的总结
查看>>
【转】HTTP中的长连接和短连接分析
查看>>
scala 基本语法
查看>>
2019.08.02 学习整理
查看>>
JavaScript面向对象基础语法总结
查看>>
页面输入模糊数据---异步后台查询
查看>>
Java基础入门(二)
查看>>
Numpy数组
查看>>
数据库设计(1)
查看>>
Cocos2d-x 脚本语言Lua基本数据结构-表(table)
查看>>
BZOJ.4695.最假女选手(线段树 Segment tree Beats!)
查看>>
迭代器&&生成器
查看>>
js中的事件委托或是事件代理详解
查看>>
如何显示超大图像
查看>>
spring@Resource注解
查看>>
实践语法----文件创建删除读写
查看>>
Linux学习笔记(第六章)
查看>>